Chengdu Wattsine Electronic Technology company

Basic characteristics of solid-state power sources:
Provides up to 3000W of continuous wave or pulse power;
Continuously adjustable power output can be achieved;
The frequency source adopts PLL phase locking technology, and the frequency stability is very high.
Solid-state power source has good power stability;
Power put most of the built-in ringer and load, adapt to a variety of resident wave ratio load;
Have a perfect protection circuit to ensure the reliable operation of solid-state power sources;
Solid-state power sources have a much longer service life than other power sources.
Often used in microwave chemistry, plasma generation, semiconductor microwave applications, scientific research energy applications and other directions

Working mode
Continuous wave Pulse wave Continuous wave and pulse wave

The way of control
Remote Communication Control RS232/RS485/Ethernet/Analog Control Local Communication Control (LCD Screen)

The working environment
Ambient temperature: 5 to 40 degrees C Indoor temperature 5 to 40 degrees C, relative humidity ≤ 70% Atmospheric pressure: 80kPa to 106kP

Cooling mode
Circulating water cooling;
Inlet water temperature: 5 to 28 degrees C;
Water flow: 8L/MIN (amplifier section);
Water flow: 2L/MIN (power supply part);

Features
Control: equipment operating status and parameter settings, can remotely view the working status information, can be remotely configured working parameters;
Alarm: output power, standing wave, current, temperature, can be viewed remotely alarm information;
Protection: output station wave is too large, too warm, too power, overcurrent, the system automatically shuts down the RF output;

Interface definition
Power input: three-phase five-wire AC, line voltage 380V, frequency 50-60HZ, maximum current per phase 8.4A, (other AC input requirements please consult)
RF output interface: BJ26 waveguide;
Control interface (Opration) :D B9 female head (external screen control, RS232, RS485, ANALOG IO), RJ45 (TCP/IP);
In/out: 1/2" outer thread (amplifier part) 1/4" outer thread (power supply part);