Dongguan Longqing Metal&Machinery Co., Ltd

The user sets the number of cluster pieces and the length of the AGM partition, and the chip packing machine automatically feeds and packs the pieces, which greatly improves the production efficiency and labor.
Suitable for micro-dense lead-acid battery polar group inclusions, such as 12V1.2Ah, 0.8Ah and so on.
 PLC control, touch-type man-machine interface, plate wrapping machine and film wrapping machine are independent of each other, and organically combined;
 Double partition feeding rack, feeding motor according to the detection of photoelectric signal, automatic feeding;
 According to the size of the plate, the AGM length and compensation value of the separator are freely set, and the separator conveying measurement mechanism automatically measures and cuts according to the set value;
 Adjustable clearance of the bulkhead conveying mechanism to adjust the compression ratio of the bulkhead; The position of the separator cutter can be adjusted up and down to adjust the length of the partition of different specifications
Central location;
 According to the size of the plate, the width of the bulkhead conveyor mechanism and the positive and negative plate clad track can be adjusted; The model can be replaced with the corresponding template, channel 15
Complete the model replacement within minutes, especially suitable for multi-specification battery pack board;
 The positive and negative plates adopt parallel chain feeding, the feeding is balanced, stable and neat, and the lack of material alarm;
 Freely set the number of cluster slices, such as 2+/2-, 3+/4-....... 7+/8-etc.; Adopt the combination mechanism of card pack stacking plate and rotary transfer pole group; Pole group conveying
The use of card seat transmission, with conveyor belt extreme group full material alarm function;
 The channel has longitudinal and transverse correction functions to ensure that the pole groups are neat; With pole group automatic line clearing function;
 The equipment is fully enclosed, the lower suction design, equipped with a dust collection drawer, which can effectively collect lead dust and isolate lead dust from environmental pollution and damage to electrical components;
 The equipment fully considers the safety of the operator, has a safety protection function, the safety door is opened, and the equipment automatically stops or cannot be started;
 The equipment is equipped with centrifugal pump suction plate system, dust removal filter element, regular cleaning filter element, to ensure that the suction plate system is stable and effective suction plate, and the equipment has suction plate detection function;
 The device has various alarm functions and displays various alarm prompts in the man-machine interface; The equipment is equipped with functional button switches such as start, emergency stop, and reset;
 The equipment can automatically record the effective working time, failure time, number of failures and current output;
 The equipment has manual/automatic, linkage and other working modes;
 Users can select left and right models according to the production site;
 The aircraft is only a single-charter model;