GG INDUSTRIA DE EQUIPAMENTOS MEDICOS LTDA

Autoclave MD800 from GG Indústria de Equipamentos Médicos Ltda is an equipment used for saturated steam sterilization with
Gravitational cold air removal system. Autoclaving sterilization is one of the most common processes in laboratories,
hospitals, companies and industries, being an efficient, fast and economical method. Medical instrument that works through the
manipulation of four essential factors: Time, Temperature, Pressure and Steam. Its primary use: sterilizing materials and
medical and hospital articles. It has an electronic data crossing system – Pressure and temperature; Electronic system
power control; Drying system with door ajar and automatic door opening system for drying.
Manufactured in accordance with Brazilian regulations and the required safety standards that guarantee the conformity of the
equipment.

External Structure: It consists of the cabinet and its finishes, which are made of carbon steel plates, and later
subjected to an electrostatic painting process. Its external structure also includes: a rubber shock absorber, which has
as a function, the absorption of vibrations, and provide support to the structure of the equipment, leveling it at an angle of inclination for correct operation; PG9 cable gland and the pressure outlet device.

Internal Structure: It is composed of the pressure system that is made of copper, which carries out the passage of water vapor
pressurized camera (tank), pressure sensor, solenoid and disposal hose, a control board (component that controls all operational functions and parameters performed by the equipment) and a translucent silicone hose
(responsible for conducting the pressurized water vapor to the pressure sensor to enable its reading).

Digital panel: Composed of an LCD Backlight display, push buttons and their anodized aluminum finishes (easy to handle,
cleaning), with indicators of sterilization cycles and time. The equipment has five cycles, as specified below:

Cycles:
Cycle 1: Time: 30 minutes | Temperature: 121 ºC
Cycle 2: Time: 15 minutes | Temperature: 121 ºC
Cycle 3: Time: 10 minutes | Temperature: 127 ºC
Cycle 4: Time: 06 minutes | Temperature: 134 ºC
Cycle 5: Time: 25 minutes | Drying

Tank (chamber): it is made of stainless steel (with a mirror finish) and is the place where the entire process of
autoclaving, with a total capacity of 12 liters. As a whole, it also includes: a stainless steel tank flange,
door seal made of 60 Shore Silicone (performs the function of hermetically sealing the autoclaving tank), the tank support, the water sensor, the tray support, the larger and smaller tray (both made of stainless steel) and the connector for thermal qualification (Device located at the back of the stainless steel tank), which is used as an input for the temperature sensors used during the Thermal Qualification process.