RC Space Batam

This is the Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF Airplane. Features: IMAA Legal Made of balsa and plywood One-piece wing with a plywood wing joiner Dual servo aileron control Top Flite MonoKote covering Painted fiberglass cowl Cockpit with seats and instrument panel Two landing lights in cowl, one navigational light on each wing and red MARS beacon light on top of fin (requires separate receiver battery) Polished aluminum spinner, 2.25" (57mm) diameter Main, two piece fiberglass landing gear Nosegear 0.20" (5mm) diameter prebent wire Fiberglass wheel pants, white colored Three foam wheels, two main 3.25" (82mm) diameter, one nosewheel 2.75" (70mm) diameter Two-piece composite engine mount Fuel tank is approx. 14oz (420cc) Building Time: Ready to fly in 15-20 hours Warranty (through the manufacturer): Top Flite Models guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification. In no case shall Top Flite's liability exceed the original cost of the purchased kit. The Top Flite Cessna Skylane 182 is instantly recognizable and easy to enjoy with this Gold Edition ARF (almost-ready-to-fly). The attention to authentic touches is beyond obvious at every turn, from the twin radio antenna on the wing to the built-in lighting system. Includes: One Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF Airplane with decals, all hardware, clear plastic windshield and side glass, fiberglass tail cone, engine mount, cowl, three wheels, instruction manual and wheel pants Requires: Engine: .60-.91 cu in (10-15cc) two-stroke OR .91-1.20 cu in (15-20cc) four-stroke OR Motor: Rimfire 120 (50-65-450) Outrunner LiPo Batteries: Two connected in series if using electric motor Radio: 6-channel Servos: Six standard with at least 44oz/in (3.2kg/cm) torque 24" (610mm) Servo Extensions: Two for ailerons 12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip lights Y Harnesses: Two for aileron and flap surfaces Receiver Packs: 1000mAh minimum and 600mAh pack for flying lights Spec: Wingspan: 81 in (2060mm) Wing Area: 898 sq in (57.9 dm2) Weight: 11.5 - 12.5lb (5220 - 5670g) Wing Loading: 30 - 32 oz/sq ft (92 - 98 g/sq dm) Length: 64 in (1630mm) Airfoil: Semi-symmetrical CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of the wing Control Throws Low Rate Elevator: 3/4" (19mm) 10 degrees Rudder: 5/8" (16mm) 9 degrees Ailerons: 1/2" (13mm) 14 degrees High Rate Elevator: 1-1/16" (27mm) 15 degrees Rudder: 1" (25mm) 15 degrees Ailerons: 5/8" (16mm) 17 degrees Flaps Half (down): 1/2 - 1" (25mm) 18 degreesdown Full (down): 2" (51mm) 36 degrees down