Shanghai Clirik Machinery Co., Ltd

The European version of the crude grinding mill is mainly used in metallurgy, mining, cement, chemical, refractory materials and ceramics and other industrial sectors, in highway construction, water conservancy projects, construction gravel, mechanism sand processing and other fields widely used, is very suitable for breaking a variety of soft and medium hard ore for rough, medium crushing, fine crushing operations. The European version of the crude powder mill is in the straight-through grinding combined with the needs of customer production, in the traditional grinding machine on the basis of the design of the European version of the crude powder press to solve the user's fineness of the finished product less than 3 mm of mixed material sage a demand. The European version of the coarse powder mill is the grinding equipment experts set over the years in the grinding industry research experience, collect the advice and requirements of customers at home and abroad, replacing the Ramon grinding, shredder, ball mill and other traditional grinding equipment can only process fine powder particles a new high-tech series of products, to meet the requirements of fine sand processing customers, it is widely used in quartz sand,
Silicon sand, casting sand, abrasive sand and other fine sand industry, a high efficiency of the ideal equipment supporting the formation of closed-circuit production lines, can produce a variety of granular products, the use of a wider range of better results.

Performance characteristics of the European version of the crude powder mill

1, high production capacity, broken than large.

2, low power consumption, product granularity is uniform.

3, mechanical structure is simple, compact and lightweight.
4, investment costs are small, easy to manage and other advantages.

The composition of the European version of the crude powder mill

1, rack part: by the side plate, front box components, rear box welding parts, etc. 2, eccentric shaft rotation part: mainly by the moving jaw, eccentric shaft, bearings, bearing shousing, pulleys and so on.

Is the main part of the transmission power, the working part of the crushing cavity: mainly composed of the jaw plate, the moving jaw plate, the side liner, the guard, etc., is the working part of the broken material.

3, the insurance device: by the elbow plate, elbow seat, spring, spring lever, etc. , is the crusher in the abnormal role of insurance parts. 4, drain ingress adjustment device: the device is used to adjust the size of the drain mouth, control the granularity of the discharge.
It is mainly composed of adjusting fixed oblique blocks, adjusting sliding oblique blocks, top wire bolts, slider locking levers, etc. The European version of the coarse powder mill is mainly composed of the chassis, rotor, iron and slatand and other components. The case is divided into two parts, welded by the steel plate, and the rest of the part is bolted together. The interior of the case is equipped with a high manganese steel liner, which is easy to replace after wear, and the main axis is equipped with an array rule distribution of the hammer, with the turntable and hammer shaft composition rotor. The main body drives the spindle through the motor and triangular belt, so that the rotor rotates, the centrifugal force generated by the hammer is rotated to spread around, and large pieces of material are crushed by a high-speed moving hammer after entering the crushing cavity from the inlet. The broken qualified material is discharged from the lower part of the gaped spand, the unqualified is left in the broken cavity, the hammer and the iron block repeatedly actionuously until it can be qualified to discharge. To avoid clogging, the water content of the crushed material is generally not more than 5%.