TOKAR GMBH

Titanium Dioxide

It is a zirconium, aluminum and organic surface treated multipurpose rutile titanium dioxide pigment, it has average particle
size distribution, good whiteness, good dispersion, high gloss, good hiding power and high weather resistance properties. lt is
widely used in coating, paints, ink, leather, rubber and ink production.

.Weigh A and B glue according to the given weight ratio into the prepared cleaned container, fully mixed the mixture again the container wall by clockwise, place it along for 3 to 5 minutes, and then it can be used.



2.Take the glue according to the usable time and dosage of mixture to avoid wasting. When the temperature is below 15 ℃, please heat A glue to 30 ℃ first and then mix it to the B glue (A glue will be thicken in low temperature ); The glue must be sealed lid after use to avoid rejection caused by moisture absorption.



3.When the relative humidity is higher than 85%, the surface of the cured mixture will absorb moisture in the air, and form a layer of white mist in the surface, so when the relative humidity is higher than 85%, is not suitable for room temperature curing,suggest to use the heat curing.